Drift Association Technical Inspection Sheet
Instructions: The participant is to bring this inspection form to an authorized technical inspection station with all necessary items needed for the event.  This inspection form must be filled out by the inspector and no changes shall be made to the equipment.  All such changes will void the inspection sheet until equipment can be re-assessed by the inspector.
Date of Event		Make
Event Title		Model
Last Name		Color
First Name		License Plate #
Internal Use Only (to be filled out by a technical inspections representative)
CHECK	Modifications:
	Steering Linkage
	Hub Spacer/Adapter
	Engine
	Tires and Wheels
	At least 2 spare mounted tires (No one will be allowed to run with temporary spare tires or with no tread left 3/32nd over)
	All lug nuts / bolts tightened on approved fasteners (80ft/lb torque) and hub bearings within specifications
	Brakes
	Brake pads should have more than 25%of useful life
	Pedal Pressure Firm / All lines and master /calipers within specifications
	No Fluid leaks (oil, fuel, cooling, accessory, brakes, A/C, etc.)
	Brake lamps working order
	Interior
	Steering and linkages in good order
	No loose joints and /or damages on the suspension system and mounts
	Roll center adaptors / Alignment compensation brackets and blocks to specifications
	Exterior
	Windows cannot have cracks over 3 inches
	All body panels must be present
	Engine
	Battery secured (battery bracket)
	Air cleaner secured
	Oils and fluids filled to specifications
	Throttle action smooth / return spring to specifications
	Ignition system and Fuel system
	Wiring harness secured
	Exhaust system secured
	Safety Equipment
	Snell SA95, MA95 or newer rating approved helmet NO LOANERS AVAILABLE
	Seatbelts in proper locations and secured according to specifications
	All convertibles, open top, soft top cars must have roll bars equal or exceeding 4points from unibody or sub frame
	Miscellaneous
	Tow hooks must be present on at least one location on vehicle
	Remove floor mat, lose items (audio systems)
	All the lights and lenses taped and secure (Tandem event only)
	Tandem Run Eligibility
	Driver Nomex, racing suit, gloves
	Fire Extinguisher On-Board
	Tandem event entries must have Drift Association approved 4 Point driver protection system or 6 point with door beam
Inspection Certification:
Inspector's Name:
Signature/Date:
Owner's Acknowledgement: I hereby acknowledge that the technical inspections performed on my automobile are solely for the purpose of meeting minimum standards for the Drift Day event.  I release the inspector and Drift Association LLC. and any affiliated hosting parties from any liabilities and issues arising from their inspection of my car, including the failure of the items listed on this inspection form.
Driver's Signature:			Date: